Emcore Optiva OTS-IRG Fiber Optic Intra-Facility Links

Optiva OTS-IRIG (Inter-Range Instrumentation Group) B000 / 1 PPS (Pulse Per Second) Fiber Optic Intra-Facility links provide for simultaneous transmission of IRIG-B000 and 1PPS, or one signal each over fiber. These high-performance links feature low jitter and sharp rise and fall times. Optiva IRIG Links are SNMP compliant. They can be housed in the same …Read More

ATX I-HUB-HSG2 (Chassis & Accessories)

The ATX I-HUB-HSG2 die cast aluminum housing provides a completely field-hardened solution eliminating the need for costly buildings & OTN sites. The housing is designed for pedestal, street cabinets, underground vaults or aerial strand mounting. The housing accommodates 10 application module slots, four in the base & six in the lid. A family of application …Read More

Emcore Optiva OTS-1L2 3 GHz

Optiva Dual Wideband Fiber Optic Links are optimized to perform in the 50 MHz to 3 GHz frequency range providing transparent signal transportation for satellite antenna applications. The OTS-1L2 is a dual RF fiber optic link that accepts two RF inputs and provides two RF outputs with a single plug-in pair. This dual-density card increases …Read More

Emcore Optiva OTS-1LC 3 GHz

The Optiva OTS-1LC CWDM Wideband Fiber Optic Link is optimized to provide transparent IF, L- and S-Band signal transport and to perform in the 50 MHz to 3 GHz frequency range for satellite antenna and interfacility applications. Optiva satellite and microwave transmitters and receivers are SNMP compliant. They can be housed in the same chassis …Read More

Emcore Optiva OTS-1LT1 3 GHz

The Optiva OTS-1LT1 Wideband Fiber Optic Link is optimized to provide transparent IF, L- and S-Band signal transport and to perform in the 50 MHz to 3 GHz frequency range for satellite antenna and interfacility applications. Optiva satellite and microwave transmitters and receivers are SNMP compliant. They can be housed in the same chassis and …Read More

Emcore Optiva OTS-1LT 3 GHz

The Optiva OTS-1L 1310 nm Wideband Fiber Optic Link is optimized to provide transparent IF, L- and S-Band signal transport and to perform in the 50 MHz to 3 GHz frequency range for satellite antenna and interfacility applications. Optiva satellite and microwave transmitters and receivers are SNMP compliant. They can be housed in the same …Read More

Emcore Optiva OTS-2 18GHz Amplified

The Optiva OTS-2 18 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 50 MHz to 18 GHz frequency range for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other high-dynamic-range applications. Optiva microwave band transmitters and receivers are SNMP compliant. They can be …Read More

Emcore Optiva OTS-2 18 GHz Unamplified

The Optiva OTS-2 18 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 50 MHz to 18 GHz frequency range for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other high dynamic-range applications. Optiva microwave band transmitters and receivers are SNMP compliant. They can …Read More

Emcore Optiva OTS-2 40 Ghz Amplified

The Optiva OTS-2 40 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 50 MHz to 40 GHz frequency range for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other high dynamic- range applications. Optiva microwave band transmitters and receivers are SNMP compliant. They …Read More

Emcore Optiva OTS-2 40 GHz Unamplified

The Optiva OTS-2 40 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 50 MHz to 40 GHz frequency range for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other high dynamic-range applications. Optiva microwave band transmitters and receivers are SNMP compliant. They can …Read More

Emcore Optiva OTS-2 22 GHz Unamplified

The Optiva OTS-2 22 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 50 MHz to 22 GHz frequency range for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other high dynamic-range applications. Optiva microwave band transmitters and receivers are SNMP compliant. They can …Read More

Emcore Optiva OTS-2 22 GHz Amplified

The Optiva OTS-2 22 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 50 MHz to 22 GHz frequency range for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other high dynamic-range applications. Optiva microwave band transmitters and receivers are SNMP compliant. They can …Read More

Emcore Optiva OTS-2 X-Band

The Optiva OTS-2 X-Band transmitter and receiver are ideal to construct 7.000 to 10.000 GHz transparent fiber optic links for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other high-dynamic-range applications. Optiva satellite and microwave transmitters and receivers are SNMP compliant. They can be housed in the same chassis and monitored …Read More

Emcore Optiva OTS-2 DBS

The Optiva OTS-2 DBS transmitter and receiver are ideal to construct 17.300 to 18.400 GHz transparent fiber optic links for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other high-dynamic-range applications. Optiva satellite and microwave transmitters and receivers are SNMP compliant. They can be housed in the same chassis and monitored …Read More

Emcore Optiva OTS-2 Ku-Band

The Optiva OTS-2 Ku-Band transmitter and receiver are ideal to construct downlink 10.700 to 12.750 GHz and uplink 13.750 to 14.500 GHz transparent fiber optic links for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other high-dynamic-range applications. Optiva satellite and microwave transmitters and receivers are SNMP compliant. They can be …Read More

Emcore Optiva OTS-2 Ka-Band

The Optiva OTS-2 Ka-Band transmitter and receiver are ideal to construct downlink 18.300 to 21.200 GHz and uplink 28.350 to 31.000 GHz transparent fiber optic links for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other high-dynamic-range applications. Optiva satellite and microwave transmitters and receivers are SNMP compliant. They can be …Read More

Emcore Optiva OTS-1LS 2.5 GHz

The Optiva OTS-1LS 1310/1550 nm Wideband Fiber Optic Link is optimized to provide transparent IF, L- and S-Band signal transport and to perform in the 50 MHz to 2.5 GHz frequency range for satellite antenna and interfacility applications. Optiva satellite and microwave transmitters and receivers are SNMP compliant. They can be housed in the same …Read More

Emcore Optiva OTS-1LD 2.5 GHz

Optiva OTS-1LD 2.5 Ghz – DWDM Wideland Fiber Optic Link The Optiva OTS-1LD DWDM Wideband Fiber Optic Link is optimized to provide transparent IF, L- and S-Band signal transport and to perform in the 50 MHz to 2.5 GHz frequency range for satellite antenna and interfacility applications. Optiva satellite and microwave transmitters and receivers are …Read More

QAM Modulators and Multiplexers

ARRIS APEX1000 The ARRIS APEX1000, ARRIS’s next-generation all-purpose edge QAM, provides flexibility, high availability, high QAM density, MediaCipher encryption, and low power in an extremely cost-effective 1 RU platform. Up to three removable and hot-swappable QAM modules can be installed in the chassis. Each module provides two RF ports, which support up to eight QAM …Read More