Opticonn

Opticonn- Technologies include video over IP for 4K UHD, HDMI 2.0 over IP,
H.264 encoding & decoding. Advanced fiber optic solutions include 4K60, 4:4:4,
HDMI 2.0, 12G-SDI, 3G-SDI, HD-SDI, ASI and DVI over fiber.

Opticonn OPT-HDMI2-SLIM-xx-P

The OPT-HDMI2-SLIM-xx-P is one of the most cost effective plenum, AOC’s (Active Optical Cable) in the AV market. It is the perfect solution for extending 4K HDMI 2.0 (18 Gbps) video and audio signals long distances to projectors, remote screens and monitors for in wall and ceiling installations in conference rooms, class rooms, board rooms and auditoriums. Traditional copper cables can only extend uncompressed 4K60 signals a few meters, however, the OPT-HDMI2-SLIM-xx-P removes those limitations by using optical fibers to extend resolutions up to 3840×2160@60 Hz long distances up to 66 feet. With its plug & play design simply connect the side labeled source directly to the HDMI source and the side labeled display to the remote display/projector. OPT-HDMI2-SLIM series AOC’s are superior to other cables in its physical form-factors and performance. The cable is thin (0.13 inches), light (0.4lbs/33ft), and strong (500N cable pulling/crush load and connector pulling strength 200N). OPT-HDMI2-SLIM-xx-P cables are the perfect solution for cost effective, long reach 4K UHD extension!


H4E_H4D

The H4E encoder and H4D decoder is a simple, cost effective solution for high quali-ty, streaming over IP networks. The H4E & H4D has HDMI 1.3 input and output along with one way IR to control remote sources through the network. Additionally, it uses a high quality H.264 codec supporting up to 1080p@60, Full HD video at low bit rates. The H4E & H4D is the perfect solution for multicasting/streaming high quality HDMI video with audio over LAN using UDP or RTP streaming protocols. Finally, its compact, flange mount design allows for easy mounting on a rack shelf, behind a TV or under desk. The units come standard with 5VDC@2A power supplies.


Opticonn VX-1HDMI-LINK-2LC_

The VX-1HDMI-LINK-2LC is a compact, extremely powerful fiber optic extender pair capable of extending uncompressed HDMI 1.4a (10.2 Gbps bandwidth) over fiber. Extend resolutions up to 4096×2160@30 Hz long distances up to 328 feet/100 meters on a duplex MM fiber. With its pluggable, dongle type design simply connect the transmitter directly to the HDMI connector and the receiver to the remote monitor, making a very clean installation with no other mounting kits needed. Since the VX-1HDMI-LINK-2LC uses pure fiber connectivity between the source and display, it provides the highest quality, highest isolation and most secure connection possible. The units are powered by 5VDC@1A power supplies.


Opticonn DMD-400

The Opticonn DMD-400 decoder and DME-400 encoder is the perfect solution for high quality, low latency streaming over IP networks. The flexible design allows a wide variety of signal types/video interfaces to be sent over the network. The DMD-400 has 3G-SDI, HDMI and VGA video outputs. Along with video decoding, it supports bi-directional analog stereo audio and RS-232/422 serial data for control. Additionally, it uses a high quality H.264 codec supporting up to 1080p@60, Full HD video decoding at low bit rates. The DMD-400 decoder when paired with the DME-400 encoder can achieve 80 ms latency for live streaming applications. The DMD-400 is the perfect solution for decoding broadcast quality video, audio and RS-232/422 serial data over LAN using UDP or RTP, but is also is capable of RTSP streaming for media server applications. Finally, the DMD-400 & DME-400 has the ability to select inputs on the fly by using the select button on the front panel; easily select between any of the connect-ed video source inputs (3G-SDI, HDMI or VGA) and stream over the IP network.


Opticonn DME-400

The Opticonn DME-400 encoder and DMD-400 decoder is the perfect solution for high quality, low latency streaming over IP networks. The flexible design allows a wide variety of signal types/video interfaces to be sent over the network. The DME-400 has 3G-SDI, HDMI and VGA video inputs. Along with video streaming, it supports bi-directional analog stereo audio and RS-232/422 serial data for control. Additionally, it uses a high quality H.264 codec supporting up to 1080p@60, Full HD video at low bit rates. The DME-400 encoder when paired with the DMD-400 decoder can achieve 80 ms latency for live streaming applications. The DME-400 is the perfect solution for streaming broadcast quality video, audio and RS-232/422 serial data over LAN using UDP or RTP, but is also is capable of RTSP streaming for media server applications. Finally, the DME-400 & DMD-400 has the ability to select inputs on the fly by using the select button on the front panel; easily select between any of the connected video source inputs (3G-SDI, HDMI or VGA) and stream over the IP network.


Opticonn MSE-200

The Opticonn MediaSteam, MSE-200 is a powerful dual channel video encoder allowing two independent Full HD video streams to be broadcast or recorded at the same time. The MSE-200 has two HDMI or two component video/audio interfaces (mix & match) supporting up to 1080p@60, HD video inputs. Encode two independent video streams simultaneously to the same network or each channel can be stream separately on different networks. MSE-200 has a high quality, dual H.264 High-Profile codec, which enables live streaming, IPTV and multicasting applications. Additionally, this feature rich, cost effective encoder can support streaming not only for LAN applications, but also supports internet streaming protocols and streaming to the most popular CDN’s such as Facebook Live, YouTube, UStream, Amazon Web Services, Akamai, Wowza and Twitch; these features make it simple to broadcast content to a virtually unlimited audience.


Opticonn OTR-1U-C

The Opticonn OTR-1U-C is a cost effective, 4 slot, 1U chassis for mounting any single slot OTR transmitter or receiver in a equipment rack. Clean up the installation by racking up to 4 single slot OTR transmitters or receivers or mix and match in the same chassis. The unit comes standard with a single 90-240 VAC power supply and the OTR insert cards are hot-swappable. The OTR-1U-C also has a quite fan for proper air flow over the OTR insert cards.


Opticonn OTR-4U-C

The Opticonn OTR-4U-C is a cost effective, 16 slot, 4U chassis for mounting any single or double slot OTR-30x transmitter or receiver in a equipment rack. Clean up the installation by racking up to 16 single or 8 double slot OTR-30x transmitters or receivers or mix and match in the same chassis. The unit comes standard with redundant 110-240 VAC power supplies and the OTR-30x insert cards are hot-swappable. The OTR-4U-C also has quite fans for proper air flow over the OTR-30x insert cards.


Opticonn OTR-301-AD

The Opticonn OTR-301-AD is a compact, cost effective fiber optic extender pair capable of extending HD video up to 3G-SDI with bi-directional analog audio and serial data over fiber. Extend signals from 270 Mbps up to 3 Gbps over 30 Km on a single SM fiber. Meets SMPTE SDI standards maintaining error free transmission of SMPTE 424M, 292M, 259M and ASI over the entire 30 Km distance. The OTR-301-AD provides error free transmission with RP-198 pathological patterns. Along with SDI video, bi-directional analog audio and RS-422/485 serial data are sent on the same fiber. The units come standard as stand-alone units, however, using model OTR-1U-C or OTR-4U-C they can also be mounted in a 1U (up to 4 units) or 4U (up to 16 units) chassis with redundant power supplies. The flexible design of the OTR 30x series makes it the perfect solution any application that needs rack mounting or stand-alone units. The OTR-301-AD has an extended temperature range making it a good solution for mounting in NEMA enclosures.


Opticonn OTR-304-AD

The Opticonn OTR-304-AD is a compact, cost effective fiber optic extender pair capable of extending Quad 3G-SDI with bi-directional analog audio and serial data over fiber. Extend signals from 270 Mbps up to 3 Gbps over 30 Km on a single SM fiber. Meets SMPTE SDI standards maintaining error free transmission of SMPTE 424M, 292M, 259M and ASI over the entire 30 Km distance. The OTR-304-AD provides error free transmission with RP-198 pathological patterns. Along with the SDI video, bi-directional analog audio and RS-422/485 serial data are sent on the same fiber. The units come standard as stand-alone units, however, using model OTR-1U-C or OTR-4U-C they can also be mounted in a 1U (up to 2 units) or 4U (up to 8 units) chassis with redundant power supplies. The flexible design of the OTR 30x series makes it the perfect solution any application that needs rack mounting or stand-alone units. The OTR-304-AD has an extended temperature range making it a good solution for mounting in NEMA enclosures.


Opticonn OTR-301-D

The Opticonn OTR-301-D is a compact, cost effective fiber optic extender pair capable of extending HD video up to 3G-SDI with serial data over fiber. Extend signals from 270 Mbps up to 3 Gbps over 30 Km on a single SM fiber. Meets SMPTE SDI standards maintaining error free transmission of SMPTE 424M, 292M, 259M and ASI over the entire 30 Km distance. The OTR-301-D provides error free transmission with RP-198 pathological patterns. Along with SDI video, bi-directional RS-232/422/485 serial data and tally is sent on the same fiber. The units are built with a stand-alone compact enclosure making it the perfect solution for OB trucks, remote broadcast, mounting by remote security cameras or any other applications that might need a “throw down”, wall mount or shelf mounted fiber link. The OTR-301-D has an extended temperature range making it a good solution for mounting in NEMA enclosures.


Opticonn OTR-302

The Opticonn OTR-302 is a compact, cost effective fiber optic extender pair capable of extending bi-directional HD-SDI over fiber. Extend signals from 270 Mbps up to 1.485 Gbps up to 100 Km on a single SM fiber. Meets SMPTE SDI standards maintaining error free transmission of SMPTE 292M, 259M and ASI over the entire 100 Km distance. The OTR-302 provides error free transmission with RP-198 pathological patterns. Additionally, there is a loopout of the local input and 2 duplicate copy outputs of the remote side of the link. The units are built with a stand-alone compact enclosure making it the perfect solution for OB trucks, remote broadcast, mounting by remote security cameras or any other applications that might need a “throw down”, wall mount or shelf mounted fiber link. The OTR-302 has an extended temperature range making it a good solution for mounting in NEMA enclosures.


Opticonn OTR-304

The Opticonn OTR-304 is a compact, cost effective fiber optic extender pair capable of extending up to 4ch’s of 270 Mbps up to 3 Gbps over 30 Km on one SM fiber. Meets SMPTE SDI standards maintaining error free transmission of SMPTE 424M, 292M, 259M and ASI over the entire 30 Km distance. The OTR-304 provides error free transmission with RP-198 pathological patterns. The units come standard as stand-alone units, however, using model OTR-1U-C or OTR-4U-C they can also be mounted in a 1U (up to 4 units) or 4U (up to 16 units) chassis with redundant power supplies. The flexible design of the OTR 30x series makes it the perfect solution for any application that needs rack mounting or stand-alone units. The OTR-304 has an extended temperature range making it a good solution for mounting in NEMA enclosures.


Opticonn OTR-308-AD

The Opticonn OTR-308-AD is a cost effective fiber optic transport system capable of extending 8 ch of 3G-SDI with 8 ch bi-directional analog audio and 8ch serial data over fiber. Extend signals from 270 Mbps up to 3 Gbps over 30 Km on a single SM fiber. Meets SMPTE SDI standards maintaining error free transmission of SMPTE 424M, 292M, 259M and ASI over the entire 30 Km distance. The OTR-308-AD provides error free transmission with RP-198 pathological patterns. Along with each SDI video channel, bi-directional analog audio and RS-422/485 serial data are sent on the same fiber. The unit comes in a self contained, rack mountable, 2U modular chassis with redundant power supplies. The flexible design of the OTR 30x series makes it the perfect solution for any application that needs rack mounting or stand-alone units. The OTR-308-AD has an extended temperature range making it a good solution for mounting in NEMA enclosures.


Opticonn OTR-3000

The Opticonn OTR-3000 is a compact, but powerful fiber optic extender pair capable of ex-tending high resolution video up to 12G-SDI over fiber for 4K broadcast applications. Extend signals from 270 Mbps up to 12 Gbps over 20 Km on a single SM fiber. Meets SMPTE SDI standards maintaining error free transmission of SMPTE 424M, 292M, 259M, 2082-1, 2082-2 and ASI over the entire 20 Km distance. Additionally, the OTR-3000 provides error free transmission with RP-198 pathological patterns The units are built with a solid stand-alone compact enclosure with mounting flanges, making it the perfect solution for OB trucks, remote broadcast or any other applications that might need a “throw down”, wall mount or shelf mounted fiber link.


Opticonn 4K EzIP

The Opticonn 4K EzIP Matrix is the perfect solution for virtually unlimited connectivity of HDMI 2.0 over IP. It is a high quality, IP video matrix solution that distributes HDMI 2.0, 4K60, 4:4:4, 8 bit or HDR, 4K60, 4:2:0, 10 bit video with USB, RS-232 and IR simultaneously over an IP network. It is easily managed and controlled using a centralized controller with a user friendly web UI. The 4K EzIP Matrix consists of extremely low latency (<30 ms) encoding and decoding using the EZE-4KHDMI-IP and EZD-4KHDMI-IP as end points in the network. Each encoder and decoder can be powered via optional POE through a POE enabled Gigabit Ethernet Switch or powered with the provided power supplies. The 4K EzIP Matrix software provides the ability to switch any input to any output in a point to point or point to multi-point configuration, easily set up & configure video walls, manage & control each end point, provide system monitoring with event logging, assign user access privileges and schedule video I/O’s on and off. This powerful, unique, and user friendly software is what makes it easy for anyone to build their own 4K EzIP Matrix.